Antibacterial and self-healing sepiolite-based hybrid hydrogel for hemostasis and wound healing.

The process of wound healing necessitates a specific environment, thus prompting extensive research into the utilization of hydrogels for this purpose. While numerous hydrogel structures have been investigated, the discovery of a self-healing hydrogel possessing favorable biocompatibility, exceptional mechanical properties, and effective hemostatic and antibacterial performance remains uncommon. In this work, a polyvinyl alcohol (PVA) hybrid hydrogel was meticulously designed through a simple reaction, wherein CuxO anchored sepiolite was incorporated into the hydrogel. The results indicate that introduction of sepiolite greatly improves the toughness, self-healing and adhesion properties of the PVA hydrogels. CuxO nanoparticles endow the hydrogels with excellent antibacterial performance towards Staphylococcus aureus and Escherichia coli. The application of hybrid hydrogels for fast hemostasis and wound healing are verified in vitro and in vivo with rat experiments. This work thereby demonstrates an effective strategy for designing biodegradable hemostatic and wound healing materials.

Long-term effects of compound passivator coupled with silicon fertilizer on the reduction of cadmium and arsenic accumulation in rice and health risk evaluation.

Cadmium (Cd) and arsenic (As) are precedence-controlled contaminants in paddy soils, that can easily accumulate in rice grains. Limestone and sepiolite (LS) compound passivator can obviously reduce Cd uptake in rice, whereas Si fertilizer can effectively decrease rice As uptake. Here, the synergistic effects of the LS compound passivator coupled with Si fertilizer (LSCS) on the soil pH and availability of Si, Cd, and As, as well as rice grain Cd and As accumulation and its health risk were studied based on a 3-year consecutive field experiment. The results showed that the LSCS performed the best in terms of synchronously decreasing soil Cd and As availability and rice Cd and As uptake. In the LSCS treatments, soil pH gradually decreased with the rice-planting season, while soil available Cd and As contents gradually increased, suggesting that the influence of LSCS on Cd and As availability gradually weakened with rice cultivation. Nonetheless, the contents of Cd and inorganic As (i-As) in rice grains treated with LSCS were slightly affected by cultivation but were significantly lower than the single treatments of LS compound passivator or Si fertilizer. According to the Cd and As limit standards in food (GB2762-2022), the Cd and i-As content in rice grains can be lowered below the standard by using the 4500 kg/hm2 LS compound passivator coupled with 90 kg/hm2 Si fertilizer in soil and spraying 0.4 g/L Si fertilizer on rice leaves for at least three years. Furthermore, health risk evaluation revealed that LSCS treatments significantly reduced the estimated daily intake, annual excess lifetime cancer risk, and hazard quotient of Cd and i-As in rice grains. These findings suggest that LSCS could be a viable approach for reducing Cd and As accumulation in rice grains and lowering the potential health risks associated with rice.

Preparation and application of chlorine dioxide gas slow-release fresh-keeping card based on polylactic acid.

Blueberries are highly perishable after harvest, so a simple preservation method is needed to extend the shelf life of blueberries. In this study, sodium chlorite-loaded sepiolite was added to polylactide solution with tartaric acid to create a ClO2 gas slow-release fresh-keeping card. The fresh-keeping card absorbs moisture in the air, which causes tartaric acid to enter the sepiolite and react with sodium chlorite to release ClO2 gas slowly. The study investigated the impact of fresh-keeping cards on the quality attributes of blueberries, including appearance, decay rate, ethylene release rate, respiration rate, hardness, ascorbic acid content, and anthocyanin concentration. Low-field nuclear magnetic technology was used to analyze the water state and distribution of blueberries during storage. The results showed that the ClO2 gas released by the fresh-keeping card can destroy ethylene in the air and kill microorganisms in blueberries, thereby delaying fruit decay.

Efficient removal of phosphorus and nitrogen from aquatic environment using sepiolite-MgO nanocomposites: preparation, characterization, removal performance, and mechanism.

Excessive phosphorus will lead to eutrophication in aquatic environment; the efficient removal of phosphorus is crucial for wastewater engineering and surface water management. This study aimed to fabricate a nanorod-like sepiolite-supported MgO (S-MgO) nanocomposite with high specific surface area for efficient phosphate removal using a facile microwave-assisted method and calcining processes. The impact of solution pH, adsorbent dosage, contact time, initial phosphate concentrations, Ca2+ addition, and N/P ratio on the phosphate removal was extensively examined by the batch experiments. The findings demonstrated that the S-MgO nanocomposite exhibited effective removal performance for low-level phosphate (0 ~ 2.0 mM) within the pH range of 3.0 ~ 10.0. Additionally, the nanocomposite can synchronously remove phosphate and ammonium in high-level nutrient conditions (> 2.0 mM), with the maximum removal capacities of 188.49 mg P/g and 89.78 mg N/g. Quantitative and qualitative analyses confirmed the successful harvesting of struvite in effluent with high-phosphate concentrations, with the mechanisms involved attributed to a synergistic combination of sorption and struvite crystallization. Due to its proficient phosphate removal efficiency, cost-effectiveness, and substantial removal capacity, the developed S-MgO nanocomposite exhibits promising potential for application in phosphorus removal from aquatic environments.

MicroRNA-146a-loaded magnesium silicate nanospheres promote bone regeneration in an inflammatory microenvironment.

Reconstruction of irregular oral-maxillofacial bone defects with an inflammatory microenvironment remains a challenge, as chronic local inflammation can largely impair bone healing. Here, we used magnesium silicate nanospheres (MSNs) to load microRNA-146a-5p (miR-146a) to fabricate a nanobiomaterial, MSN+miR-146a, which showed synergistic promoting effects on the osteogenic differentiation of human dental pulp stem cells (hDPSCs). In addition, miR-146a exhibited an anti-inflammatory effect on mouse bone marrow-derived macrophages (BMMs) under lipopolysaccharide (LPS) stimulation by inhibiting the NF-κB pathway via targeting tumor necrosis factor receptor-associated factor 6 (TRAF6), and MSNs could simultaneously promote M2 polarization of BMMs. MiR-146a was also found to inhibit osteoclast formation. Finally, the dual osteogenic-promoting and immunoregulatory effects of MSN+miR-146a were further validated in a stimulated infected mouse mandibular bone defect model via delivery by a photocuring hydrogel. Collectively, the MSN+miR-146a complex revealed good potential in treating inflammatory irregular oral-maxillofacial bone defects.

Hybrid Implants Based on Calcium-Magnesium Silicate Ceramic Diopside as a Carrier of Recombinant BMP-2 and Demineralized Bone Matrix as a Scaffold: Ectopic Osteogenesis in Intramuscular Implantation in Mice.

High efficiency of hybrid implants based on calcium-magnesium silicate ceramic, diopside, as a carrier of recombinant BMP-2 and xenogenic demineralized bone matrix (DBM) as a scaffold for bone tissue regeneration was demonstrated previously using the model of critical size cranial defects in mice. In order to investigate the possibility of using these implants for growing autologous bone tissue using in vivo bioreactor principle in the patient's own body, effectiveness of ectopic osteogenesis induced by them in intramuscular implantation in mice was studied. At the dose of 7 µg of BMP-2 per implant, dense agglomeration of cells, probably skeletal muscle satellite precursor cells, was observed one week after implantation with areas of intense chondrogenesis, initial stage of indirect osteogenesis, around the implants. After 12 weeks, a dense bone capsule of trabecular structure was formed covered with periosteum and mature bone marrow located in the spaces between the trabeculae. The capsule volume was about 8-10 times the volume of the original implant. There were practically no signs of inflammation and foreign body reaction. Microcomputed tomography data showed significant increase of the relative bone volume, number of trabeculae, and bone tissue density in the group of mice with BMP-2-containing implant in comparison with the group without BMP-2. Considering that DBM can be obtained in practically unlimited quantities with required size and shape, and that BMP-2 is obtained by synthesis in E. coli cells and is relatively inexpensive, further development of the in vivo bioreactor model based on the hybrid implants constructed from BMP-2, diopside, and xenogenic DBM seems promising.

Modified approaches to prepare nano-magnesium silicates with hierarchical pore structure and their performance towards adsorption of Cd2.

A series of flower-like magnesium silicate samples with hierarchical pore were prepared by the solvothermal method under template-free conditions using sodium dodecyl sulfate as the modifier and ethanol-water as the solvent. These samples were characterized by various methods and were evaluated for the adsorption of heavy metal Cd2+. The results showed that the adding modifier did not change the crystal structure of the magnesium silicate samples. In the range of 2~80 nm, they still showed hierarchical pore distribution mainly composed of mesopores and macropores, which facilitates the rapid transport of adsorbent within the pore channel. Therefore, the adsorption of Cd2+ was greatly accelerated. Meanwhile, the larger specific surface area (as high as 553 m2/g) of these samples significantly increased the theoretical maximum adsorption amount of Cd2+ up to 295.3 mg/g due to more available adsorption sites. The adsorption dynamic behavior of the samples on Cd2+ was in accordance with the pseudo-second-order adsorption model, and their thermodynamic behavior follows the Langmuir adsorption model. The adsorption mechanism of the sample was proposed as electrostatic adsorption and exchange of metal ions and acidic groups on its surface with ions in solution. The obtained magnesium silicate materials are expected to remove heavy metals from wastewater.

A new simpler and reliable method for determining mineral oil in sewage sludge: Influence of biogenic compounds for the quantitative analysis of C10-C40 hydrocarbons.

The characterization of organic contaminants in sewage sludge is a fundamental step to address the relevant most appropriate management practice. In this perspective, C10-C40 hydrocarbon content was considered in Italy a crucial parameter to be considered, in spite of its irrelevance in the literature. The very complex mixture of organic substances of both biogenic and anthropogenic origin the sludge is made up of makes sewage sludge a matrix of uniqueness nature, and the analytic determination of hydrocarbon content through conventional procedures may be subjected to overestimation. In this work, optimization of two conventional protocols for the determination of mineral oil (EN14039 and IRSA CNR gravimetric method) were run with attention to anthropogenic compounds potentially affecting the C10-C40 mineral hydrocarbons determination. Effects from the first manipulations of sewage sludge samples to extraction procedure and clean-up operations were investigated. A new simple procedure was set up and tested on 30 samples from different wastewater treatment plants (WWTPs). Through a simple extraction with hexane (12 mL per 2 g of dried sludge, acidified with HCl conc.) at room temperature for 2 h, followed by a clean-up on Florisil column (10 mL-2 g) a confident determination of C10-C40 were obtained with respect to conventional optimized procedures. Variability within the range 0.06-9.49% was calculated with respect to the average value determined using three different methods, with an average value of 2.48 ± 2.37%, demonstrating the robustness of the determination. Up to 3% of the total hydrocarbons were identified as naturally occurring, namely terpenes, squalenes and deoxygenized sterols, passed through the clean-up Florisil column. A significant incidence (up to 75%) of the final overall C10-C40 content was found to be related to the C10-C20 component, originally present in the commercial polyelectrolytes in emulsion, widely used for conditioning before mechanical dewatering.

Halloysite Nanotubes and Sepiolite for Health Applications.

The need for safe, therapeutically effective, and patient-compliant drug delivery systems continuously leads researchers to design novel tools and strategies. Clay minerals are widely used in drug products both as excipients and active agents but, in recent years, there has been a growing interest in research aimed at the development of new organic or inorganic nanocomposites. The attention of the scientific community has been drawn by nanoclays, thanks to their natural origin, worldwide abundance, availability, sustainability, and biocompatibility. In this review, we focused our attention on the studies inherent to the pharmaceutical and biomedical applications of halloysite and sepiolite, and their semi-synthetic or synthetic derivatives, as drug delivery systems. After having described the structure of both materials and their biocompatibility, we delineate the use of the nanoclays to enhance the stability, the controlled release, the bioavailability, and the adsorption properties of drugs. Several types of surface functionalization have been discussed, showing that these materials could be used for the development of an innovative therapeutic approach.

Incorporation of clay minerals into magnesium phosphate bone cement for enhancing mechanical strength and bioactivity.

The poor mechanical strength and bioactivity of magnesium phosphate bone cements (MPCs) are the vital defects for bone reconstruction. Clay minerals have been widely used in biomedical field due to the good reinforcing property and cytocompatibility. Here, laponite, sepiolite or halloysite were incorporated to fabricate MPCs composite, and the composition, microstructure, setting time, compressive strength, thermal stability, degradation performance,in vitrobioactivity and cell viability of MPCs composite were investigated. The results suggested that the MPCs composite possessed appropriate setting time, high mechanical strength and good thermal stability. By contrast, MPCs composite containing 3.0 wt.% of sepiolite presented the highest compressive strength (33.45 ± 2.87 MPa) and the best thermal stability. The degradation ratio of MPCs composite was slightly slower than that of MPCs, and varied in simulated body fluid and phosphate buffer solution. Therefore, the obtained MPCs composite with excellent bioactivity and cell viability was expected to meet the clinical requirements for filling bone defect.

Sustainable removal of uranium from acidic wastewater using various mineral raw materials.

Various types of plutonic and volcanic rocks and their alteration products from Greece (serpentinite, magnesite and andesite), have been used for sustainable removal of Uranium (U) from the acidic drainage of Kirki mine, as well as for the pH increase of the polluted solutions. In this light, this study aims at the further understanding and improvement of the ecofriendly reuse of sterile, natural raw materials (including those remaining through industrial processing and engineering testing of aggregate rocks), for remediation of acid mine drainage. The selected rocks constitute such residues of sterile materials were used as filters in experimental continuous flow devices in the form of batch-type columns, in order to investigate acidic remediation properties with special focus on U removal. The initial pH of the wastewater was 2.90 and increased after seven (7) days of experimental application and more specifically from the fourth day onwards. Uranium removal became quantitatively significant once pH reached the value of 5.09. The volcanic rocks appeared to be more effective for U removal than the plutonic ones because of microtextural differences. However, optimum U removal was mainly achieved by serpentinite: while the raw materials rich in Mg strongly reacted and remediated the pH of the drainage water waste. Furthermore, the increase of pH values due to the presence of mineral raw materials, provided increased oxidation potential which deactivated the toxic load of metals, particularly U. Consequently, batch-type serpentinite reaction with the tailing fluid caused a drop in U concentration from an initial value of 254 ppb to the one of 8 ppb, which corresponds to 97% of removal. Andesite presented the second best reactant for experimental remediation, especially when it was mixed with magnetically separated mineral fractions. Despite the fact that the proposed methodology is currently at a relatively low Technology Readiness Level (TRL), it carries the potential to become an extremely effective and low-cost alternative to conventional environmental restoration technologies.

Hybrid Implants Based on Calcium-Magnesium Silicate Ceramics Diopside as a Carrier of Recombinant BMP-2 and Demineralized Bone Matrix as a Scaffold: Dynamics of Reparative Osteogenesis in a Mouse Craniotomy Model.

Calcium-magnesium silicate ceramics, diopside, is a promising material for use in bone plastics, but until now the possibility of its use as a carrier of recombinant bone morphogenetic protein-2 (BMP-2) has not been studied, as well as the features of reparative osteogenesis mediated by the materials based on diopside with BMP-2. Powder of calcium-magnesium silicate ceramics was obtained by solid-state synthesis using biowaste - rice husks and egg shells - as source components. Main phase of the obtained ceramics was diopside. The obtained particles were irregularly shaped with an average size of about 2.3 µm and ~20% porosity; average pore size was about 24 nm, which allowed the material to be classified as mesoporous. Diopside powder adsorbs more than 150 µg of recombinant BMP-2 per milligram, which exceeds binding capacity of hydroxyapatite, a calcium-phosphate ceramic often used in hybrid implants, by more than 3 times. In vitro release kinetics of BMP-2 was characterized by a burst release in the first 2 days and a sustained release of approximately 0.4 to 0.5% of the loaded protein over the following 7 days. In vivo experiments were performed with a mouse model of cranial defects of critical size with implantation of a suspension of diopside powder with/without BMP-2 in hyaluronic acid incorporated into the disks of demineralized bone matrix with 73-90% volume porosity and macropore size from 50 to 650 µm. Dynamics of neoosteogenesis and bone tissue remodeling was investigated histologically at the time points of 12, 21, 48, and 63 days. Diopside particles were evenly spread in the matrix and caused minimal foreign body reaction. In the presence of BMP-2 by the day 63 significant foci of newly formed bone tissue were formed in the implant pores with bone marrow areas, moreover, large areas of demineralized bone matrix in the implant center and maternal bone at the edges were involved in the remodeling. Diopside could be considered as a promising material for introduction into hybrid implants as an effective carrier of BMP-2.

Deep-branching acetogens in serpentinized subsurface fluids of Oman.

Little is known of acetogens in contemporary serpentinizing systems, despite widely supported theories that serpentinite-hosted environments supported the first life on Earth via acetogenesis. To address this knowledge gap, genome-resolved metagenomics was applied to subsurface fracture water communities from an area of active serpentinization in the Samail Ophiolite, Sultanate of Oman. Two deeply branching putative bacterial acetogen types were identified in the communities belonging to the Acetothermia (hereafter, types I and II) that exhibited distinct distributions among waters with lower and higher water-rock reaction (i.e., serpentinization influence), respectively. Metabolic reconstructions revealed contrasting core metabolic pathways of type I and II Acetothermia, including in acetogenic pathway components (e.g., bacterial- vs. archaeal-like carbon monoxide dehydrogenases [CODH], respectively), hydrogen use to drive acetogenesis, and chemiosmotic potential generation via respiratory (type I) or canonical acetogen ferredoxin-based complexes (type II). Notably, type II Acetothermia metabolic pathways allow for use of serpentinization-derived substrates and implicate them as key primary producers in contemporary hyperalkaline serpentinite environments. Phylogenomic analyses indicate that 1) archaeal-like CODH of the type II genomes and those of other serpentinite-associated Bacteria derive from a deeply rooted horizontal transfer or origin among archaeal methanogens and 2) Acetothermia are among the earliest evolving bacterial lineages. The discovery of dominant and early-branching acetogens in subsurface waters of the largest near-surface serpentinite formation provides insight into the physiological traits that likely facilitated rock-supported life to flourish on a primitive Earth and possibly on other rocky planets undergoing serpentinization.

The preparation of lactoferrin/magnesium silicate lithium injectable hydrogel and application in promoting wound healing.

The development of novel wound dressings with highly effective antibacterial and accelerating wound healing properties has become the focus of current research. In this study, a novel and injectable lactoferrin (LF)/lithium magnesium silicate hydrogel (LMSH) was first synthesized through a simple electrostatic interaction method. The physical and biological properties are systematically characterized. The results show that the synthesized LF/LMSH has good antibacterial properties and biocompatibility. More importantly, it can effectively promote wound healing in the rat full-thickness skin wound model after 14 days post-operation, and the healing rate can reach 99.1 %, which is much higher than that of other groups. Meanwhile, histochemical and immunofluorescent staining confirm that the prepared injectable LF/LMSH has good pro-collagen deposition, pro-angiogenic and anti-inflammatory properties. The healed wounds present a consistently thickened epidermis with more follicular and glandular structures, indicating the great potential of the prepared material for wound management.

Thermodynamics, Kinetics, and Mechanisms of the Co-Removal of Arsenate and Arsenite by Sepiolite-Supported Nanoscale Zero-Valent Iron in Aqueous Solution.

In this study, a newly synthesized sepiolite-supported nanoscale zero-valent iron (S-nZVI) adsorbent was tested for the efficient removal of As(III) and As(V) in aqueous solution. Compared with ZVI nanoparticles, the As(III) and As(V) adsorption abilities of S-nZVI were substantially enhanced to 165.86 mg/g and 95.76 mg/g, respectively, owing to the good dispersion of nZVI on sepiolite. The results showed that the adsorption kinetics were well fitted with the pseudo-second-order model, and the adsorption isotherms were fitted with the Freundlich model, denoting a multilayer chemical adsorption process. The increase in the initial solution pH of the solution inhibited As(III) and As(V) adsorption, but a weaker influence on As(III) than As(V) adsorption was observed with increasing pH. Additionally, the presence of SO42- and NO3- ions had no pronounced effect on As(III) and As(V) removal, while PO43- and humic acid (HA) significantly restrained the As(III) and As(V) adsorption ability, and Mg2+/Ca2+ promoted the As(V) adsorption efficiency. Spectral analysis showed that As(III) and As(V) formed inner-sphere complexes on S-nZVI. As(III) oxidation and As(V) reduction occurred with the adsorption process on S-nZVI. Overall, the study demonstrated a potential adsorbent, S-nZVI, for the efficient removal of As(III) and As(V) from contaminated water.

Global interpretation and generalizability of boosted regression models for the prediction of methylene blue adsorption by different clay minerals and alkali activated materials.

In this study, Gradient Boosted Regression Trees is applied, for the first time, to predict governing factors for methylene blue (MB) adsorption on a variety of adsorbents involving clay minerals, such as kaolinite and sepiolite together with industrial wastes red mud and fly ash, and alkali activated materials synthesized from aforementioned raw materials. Dataset was constructed using electronic databases, such as ScienceDirect, Scopus, Elsevier, and Google, experimental studies published between 2005 and 2022 were covered. The final dataset included experimental conditions, such as adsorbent type, adsorbent properties (surface characteristics, density, and chemical modifications), pH of the medium, adsorbent dosage, and temperature; and it involved 914 datapoints, which were extracted out of 75 papers (out of ∼1360 initially screened). Among distinct parameters, initial adsorbate concentration was found to be the most dominant factor affecting the MB uptake. Concordantly, pH of the solution medium, raw material selection, and modification types were also found to be significant in MB adsorption. Results showed that in terms of raw material and modification types, sepiolite and chemical (acid and/or alkaline modification) and thermal treatments, respectively, come forward as the most powerful candidates for enhanced MB adsorption performance. Modifications applied on adsorbents should be evaluated separately, as there is no general rule applicable for all experimental conditions, and the strength of the contribution of modification type also depends on initial adsorbate concentration. Implementation of various imputation methods showed the importance of reporting experimental factors, such as surface area, in the literature. Range of applicability of the suggested modeling procedure was assessed to help experimenters in testing MB uptake under novel experimental conditions.

Calcareous Materials Effectively Reduce the Accumulation of Cd in Potatoes in Acidic Cadmium-Contaminated Farmland Soils in Mining Areas.

The in situ chemical immobilization method reduces the activity of heavy metals in soil by adding chemical amendments. It is widely used in farmland soil with moderate and mild heavy metal pollution due to its high efficiency and economy. However, the effects of different materials depend heavily on environmental factors such as soil texture, properties, and pollution levels. Under the influence of lead-zinc ore smelting and soil acidification, Cd is enriched and highly activated in the soils of northwestern Guizhou, China. Potato is an important economic crop in this region, and its absorption of Cd depends on the availability of Cd in the soil and the distribution of Cd within the plant. In this study, pot experiments were used to compare the effects of lime (LM), apatite (AP), calcite (CA), sepiolite (SP), bentonite (BN), and biochar (BC) on Cd accumulation in potatoes. The results showed that the application of LM (0.4%), AP (1.4%), and CA (0.4%) had a positive effect on soil pH and cations, and that they effectively reduced the availability of Cd in the soil. In contrast, the application of SP, BN, and BC had no significant effect on the soil properties and Cd availability. LM, AP, and CA treatment strongly reduced Cd accumulation in the potato tubers by controlling the total 'flux' of Cd into the potato plants. In contrast, the application of SP and BN promoted the migration of Cd from the root to the shoot, while the effect of BC varied by potato genotype. Overall, calcareous materials (LM, CA, and AP) were more applicable in the remediation of Cd-contaminated soils in the study area.

Suitability of the global forest cover change map to assess climatic megadisturbance impacts on remote tropical forests.

The occurrence and combination of extreme meteorological events may lead to severe (megadisturbance) impacts on conserved forests and protected areas all over the world. Recent research has shown that megadisturbance impacts (after the events of hurricanes and prolonged drought) may be detected in subtropical forest cover using changes in spectral indices derived from satellite imagery. The objective of this study is to assess the impact of megadisturbance on forest types of the Alejandro de Humboldt National Park, Republic of Cuba in the 2001-2017 time-period. The Global Forest Cover Change (GFCC, available on the Global Forest Watch website) product was validated and indicated the prominence of megadisturbance for year 2016 (85% of the total disturbed area), largely associated with the Hurricane Matthew event. A robust estimator of the disturbed forest area, based on GFCC-stratified sampled verification sites, suggests that 11,110 ± 1,771 hectares of forest (~ 16% of the Park's total area) was affected by megadisturbance between 2001 and 2017. In 2017, about 1276 hectares of forests were impacted, presumably related to a long-lasting effect of megadisturbance due to Hurricane Matthew and prolonged droughts in previous years. Four types of tropical rainforests (especially lowland rainforest and submountainous sclerophyllous rainforest on serpentinite), that cover 43% of the National Park, accounted for about 85% of the impacts by megadisturbance. The Easternmost portion of these forests should be prioritized for conservation monitoring and possibly for forest restoration strategies. This study contributes to establishing methodological guidelines for rapid environmental assessment of remote, tropical protected areas facing the impacts of extreme meteorological events and climate change.

Synergistic removal of As(III) and Cd(II) by sepiolite-modified nanoscale zero-valent iron and a related mechanistic study.

Arsenic (As) and cadmium (Cd) are two highly toxic elements. In recent years, many newly synthesized chemical materials have been used widely for treatments of As- and Cd-contaminated effluents. However, most materials do not exhibit high efficiencies for simultaneous removal of As and Cd from water systems. Our study established a simple scheme for synthesizing a sepiolite (SEP)-modified nanoscale zero-valent iron (S-nZVI) for simultaneous removal of coexisting As and Cd from water and illuminated a possible underlying mechanism. Batch experiments showed that the maximum capacities for adsorption of As(III) and Cd(II) by S-nZVI were 230.29 mg/g and 11.37 mg/g, respectively, which represented better effects than those of other materials, as reported previously. Removal of Cd(II) depended on pH, but As(III) removal showed little dependence on pH. Coexisting ions such as phosphate (PO43-) and the conjugate base of humic acid (HA) significantly inhibited simultaneous removal of As(III) and Cd(II). In the mixed As(III)-Cd(II) system, the presence of As(III)-pretreated S-nZVI significantly enhanced Cd(II) adsorption by a factor of four over that seen for aqueous solution without As(III). XRD and XPS results showed that CdFe2O4 (Fe-O-Cd), Fe2As2O14 or FeAsO4 (Fe-O-As) were formed after As(III) and Cd(II) were captured by S-nZVI. However, a further zeta (ζ) potential analysis showed that the mechanism for As(III) and Cd(II) adsorption by S-nZVI is not just simple formation of the above chemicals, since the adsorbed As(III) increased the negative charge of S-nZVI; this suggested an electrostatic attraction between S-nZVI and Cd(II) and indicated that adsorbed As(III) created new sorption sites for Cd(II), which enhanced Cd(II) sorption via formation of ternary complexes (Fe-As-Cd). These results suggested that S-nZVI is a promising material for in situ remediation of heavy metal-contaminated groundwaters or paddy soils.

Sepiolite as an effective supplement for low-protein diets with the constant energy-protein ratio in broilers.

The present study aimed to examine the influence of sepiolite on growth performance, meat quality, intestinal health, some blood parameters, and digestibility of nutrients in broilers fed low-protein diets with the constant energy-protein ratio. A total of 252, daily male broiler chicks were allocated to four treatment groups further divided into 9 replicates each containing 7 chicks. Low-protein diets having a constant energy-protein ratio were formulated by lowering protein and energy levels of the control group diet by 5%. Sepiolite was used at the level of 1% in the diets. After 42 days of trial, total feed consumption, total body weight gain, total feed conversion ratio, and carcass yield were not influenced by reducing protein, sepiolite supplementation, and interaction between low-protein-low-energy diet and sepiolite. Reducing protein in the diets led to reducing the digestibility of nutrients, increasing ileal viscosity, decreasing villus height, villus surface area in duodenum and jejunum, and increasing abdominal fat and ether extract, cooking losses, total oxidant status, and oxidative status index in breast meat. Sepiolite supplementation to low-protein diets increased crude protein digestibility, reduced viscosity, increased villus height/crypt depth values and reduced cooking losses, and increased water holding capacity in breast meat. Blood serum biochemical parameters and minerals were not affected by sepiolite supplementation to low-protein diets. Therefore, it is concluded that sepiolite can be added as a beneficial supplement in broiler diets as well as in low-protein diets with a constant energy-protein ratio.